Rounding Robin

Home › Guides › Depreciation Methods Explained: Straight-Line, Declining Balance, SYD

Depreciation Methods Explained: Straight-Line, Declining Balance, SYD

Depreciation spreads the cost of an asset over the years it is used. The method chosen changes the timing of the expense, not the total. This guide calculates one asset under each common book method.

The example asset

A machine costs $50,000, has an expected salvage value of $5,000 and a useful life of five years. The depreciable base is $45,000.

Straight-line

The same amount each year: (Cost − Salvage) ÷ Life = $45,000 ÷ 5 = $9,000. It is the simplest method and the most widely used for financial reporting.

Double declining balance

Each year's charge is the opening book value multiplied by twice the straight-line rate: 2 ÷ 5 = 40%. Salvage value is not deducted from the base, but the asset is never depreciated below it.

YearOpening book valueDepreciationClosing book value
1$50,000$20,000$30,000
2$30,000$12,000$18,000
3$18,000$7,200$10,800
4$10,800$4,320$6,480
5$6,480$1,480$5,000

In year 5 the charge is limited to $1,480 so that book value stops at the $5,000 salvage value. Many companies switch to straight-line once that gives a higher charge than the declining balance.

150% declining balance

The same approach with a rate of 1.5 ÷ 5 = 30%. Year 1 is $15,000, year 2 is $10,500 and year 3 is $7,350. It is less accelerated than double declining balance.

Sum-of-the-years-digits

The digits of the years are added: 5 + 4 + 3 + 2 + 1 = 15. Each year takes the remaining life over that sum, applied to the depreciable base.

YearFractionDepreciation
15/15$15,000
24/15$12,000
33/15$9,000
42/15$6,000
51/15$3,000

The four methods compared

YearStraight-lineDouble decliningSum-of-the-years-digits
1$9,000$20,000$15,000
2$9,000$12,000$12,000
3$9,000$7,200$9,000
4$9,000$4,320$6,000
5$9,000$1,480$3,000
Total$45,000$45,000$45,000

Every method charges the same $45,000 in total. Accelerated methods suit assets that lose most of their usefulness early, such as technology.

Partial years

An asset bought during the year is depreciated only for the months it was in service. A common convention counts the month of purchase as a full month. A machine bought on April 10 would then take nine months of depreciation in its first calendar year.

The monthly entry and a disposal

Each month:

AccountDebitCredit
Depreciation expense$750.00
Accumulated depreciation$750.00

Suppose the machine is sold for $20,000 after exactly three years of straight-line depreciation. Accumulated depreciation is $27,000 and book value is $23,000, so there is a loss of $3,000.

AccountDebitCredit
Cash$20,000.00
Accumulated depreciation$27,000.00
Loss on disposal$3,000.00
Machinery, at cost$50,000.00

Book and tax depreciation

These are book methods. For US federal income tax, most assets are depreciated under MACRS, which sets its own recovery periods and percentages and ignores salvage value. The difference between book and tax depreciation is a common source of deferred taxes.

Using the template

The depreciation schedule template applies any of the four methods to up to 200 assets, with depreciation calculated monthly. Because it applies declining balance month by month, its figures differ slightly from the annual tables above. It also handles disposals, rolls cost and accumulated depreciation forward by class, and produces the journal entries.

Related calculators

More guides

To report an error or request a calculator or template, send feedback.

This guide is general information, reviewed 2026-11-19. It is not accounting, tax or legal advice. Accounting standards require judgment; consult a qualified professional about your own circumstances. How this site checks its work.